Introduction panel for the operation process of sheet metal fiber laser cutting machine

Introduction panel for the operation process of sheet metal fiber laser cutting machine

With the continuous development and updating of technology, although sheet metal fiber laser cutting machines are becoming more and more convenient to operate, they also need to pay attention to safety during daily use. How to use sheet metal fiber laser cutting machines safely? How to use a sheet metal fiber laser cutting machine correctly? It is a question that everyone needs to consider. In fact, many people do not have a true set of operating safety regulations in their minds. How to use a sheet metal fiber laser cutting machine to be considered safe operation? Today I will give you the answer.

1、 Before daily work

1. Check if the water temperature of the sheet metal fiber laserand chiller is normal
2. Check if the gas pressure meets the requirements
3. Check if the exhaust fan, cold dryer, and industrial circulating chiller are working properly
4. Check whether the focusing lens is contaminated (the carbon dioxide sheet metal fiber laseris directly pulled out of the lens for observation, and the fiber sheet metal fiber laseris operated for half an hour to feel whether the temperature at the focusing lens housing is abnormal by hand. Only after ensuring that there are no abnormalities can the device be turned on

2、 During daily work

1. Strictly follow the order of starting and closing the machine to prevent burning out the electrical components of the machine
2. Do not turn on the power switch with wet hands to prevent electric shock
3. When opening liquid gas, the person’s face should not be facing the exhaust port of the gas to prevent frostbite. During operation, it is also necessary to wear antifreeze gloves, and smoking is prohibited near the gas or in the workshop to prevent fire
4. Confirm material type, thickness, and size during cutting
5. After entering the program and adjusting the cutting parameters, simulate the cutting program to ensure that there are no errors before executing the cutting program
6. When operating the machine, the radiation protection door of the machine tool must be closed
7. When operating an IPG sheet metal fiber laser, it is necessary to wear radiation resistant glasses, otherwise it is prohibited to operate the machine
8. During the cutting process, it is prohibited to directly look at the cutting sparks with the naked eye, otherwise it may cause eye injuries
9. Non professional personnel are prohibited from opening the sheet metal fiber lasercasing to prevent electric shock
10. It is strictly prohibited for operators to leave the operating platform during machine operation
11. During the operation process, if a part rotates and needs to be dealt with, the program needs to be suspended and the magnification set to “0”, and the light must be turned off before entering the machine tool working area to handle the fault. During the fault handling process, the operator is not allowed to enter the operating area to operate the machine

sheet metal fiber laser cutting machines must pay attention to the operating procedures and precautions in production to avoid accidents. Only standardized operation can maintain safe production while protecting oneself from damage.