Tips for maintenance and use of metal fiber laser cutting machine
In our use of metal fiber laser cutting machine, how to maintain and use it daily? It is often asked that only by mastering the maintenance skills of metal fiber laser cutting machines can the efficiency of the equipment be better and the work efficiency of the equipment can be maximized. The following Primalaser Laser Editor briefly talks about the use and maintenance methods of metal fiber laser cutting machine as follows:
1. Keep the steel belt tight at all times
The steel belt plays a very important role in the operation of the laser cutting machine, and the material of this steel belt is steel. If the steel is not tightened during use, it is easy to cause the cut items to be thrown away. The steel belt may even slip off the track, which poses a great threat to the safety of the staff. Therefore, no matter when and where, the steel belt must be kept in a tight state, so as to prevent the construction work. The safety of personnel plays a certain protective role.
2, check the angle of the tool regularly
Check the straightness and parallelism of the track and the perpendicularity of the cutting head every six months, and promptly maintain and debug if it is abnormal. Because the straightness and parallelism of the guide rail and the perpendicularity of the cutting head directly affect the cutting accuracy. If you do not check regularly, the cutting effect may not be so good, the error will increase, and the cutting quality will be affected.
3, often clean the inside of the machine
The working principle of metal fiber laser cutting machine is to directly vaporize the metal surface during cutting to achieve the cutting purpose. In this way, a lot of dust will be generated on the surface and inside of the cutting machine. We should often use a vacuum cleaner to suck out the dust, so as to ensure that the parts inside the machine are spotless, so as to ensure that the parts can be normal. Running.
4. Parts should be treated with lubricating oil frequently
We need to lubricate the racks, rails and many parts of the cutting machine from time to time, so that they can ensure that the gears are very accurate during operation. In this way, the operation of the machine will be in the normal running track, and the precision of the cut products will be higher.
metal fiber laser cutting machine needs regular inspection and maintenance. If there is any deformation or other forms, you should immediately realize that the laser cutting head is a bit damaged, and you need to replace it. If it is not replaced in time, it will affect the cutting quality and increase the cost. Some products may have to undergo secondary processing and reduce production efficiency.
